Press Listen if there is a notification message in the display.
•
At the start screen, select Menu > Messages > Voice messages > Listen to
voice messages and press Select.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
Note: Voice mail services vary by service provider. The following
instructions are examples of common operations. Please check with your
service provider for specific instructions for using your voice mail service.
Nokia
6585 User Guide 29
Copyright © Nokia 2003
Messages (Menu 1)
WRITE DOWN VOICE MAILBOX NUMBER AND PROCESS
1
Write down your voice mailbox number.
2
Call and check your voice mail as you normally would.
3
Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Important: Be precise; you will need this information in “Setup voice mail
with dialing codes” on page 29.
INSERT DIALING CODES
Press the * key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
SETUP VOICE MAIL WITH DIALING CODES
1
At the start screen, press Contacts > 1-touch dialing, and press Select.
2
Scroll to an empty 1-touch dialing slot and press Assign.
3
Enter your voice mailbox number, including the area code.
4
Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from page 29.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5
Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6
Enter a name (such as Voice Mail) and press OK.
To dial and listen to your voice mail, just press and hold the assigned 1-touch
dialing key at the start screen.
Dialing code Indicates...
*
Bypasses a set of instructions.
p
Pauses for 2.5 seconds before sending any numbers that follow.
w
Waits for you to press the Talk key before sending the numbers or
codes that follow.
30
Copyright © Nokia 2003
• PICTURE MESSAGES